- Fiberglass
- Made in USA
- Attic This product is recommended for an attic application. Place this in between your trusses. For unfaced insulation make sure there is 2 inches of properly vented air space to prevent moisture in the insulation.
- In the Bags There are 8 Batts per Bag for a Total of 42.67 SQFT per Bag. Bulk listing of 8 Bags or Two Bundles of 4 Making the Total Square Footage for this Product 341.36 sqft.
- Kraft Facing is a Paper Backing on Insulation. This Backing Provides a Moisure Barrier/Retardent, Required in Exterior Walls. Faced Materials can be Used in Any Application for Exterior Walls, Interior Walls, Ceiling, Floors, Cathedral Ceilings, and Attic
- This Product has a R-38 R-value. The Dimensions are R-38 x 16 x 48 by 12 in Thick or Deep Making it Ideal for R-38 x 16 x 48 Construction.
- Requires Coordination on Delivery. A Non-Encypted Phone Number will be Needed. Please be Ready to Provide this with 24 Hours of Purchasing via a Phone Call or Amazon Messaging.
Description
Owens Corning EcoTouch PINK Fiberglass Insulation with PureFiber Technology is a preformed, flexible blanket insulation. It is produced in R-values from 11 to 49, with thicknesses ranging from 31/2 inches to 14 inches. It is available unfaced, or faced with either a kraft or foil vapor retarder.
Features
- Excellent thermal control
- Effective acoustical control
- Long term performance and will not settle nor slump within wall cavities
- With less dust than other fiberglass products, EcoTouch PINK Fiberglass insulation has excellent stiffness and recovery characteristics
- Compression packaging from Owens Corning speeds job site handling and installation
Environmental and Sustainability
Owens Corning is a worldwide leader in building material systems, insulation and composite solutions, delivering a broad range of high-quality products and services. Owens Corning is committed to driving sustainability by delivering solutions, transforming markets and enhancing lives. More information can be found at www.owenscorning.com.
Design Considerations
For optimum insulation performance the building thermal barrier (insulation) should be in continual alignment with the building air barrier. In framed cavities, the product thickness should match the depth of the framing members. Follow the local, applicable building code(s) to determine the need for and placement of a vapor retarder.
Do not install insulation on top, or within 3 inches of a recessed light fixture unless the fixture is labeled as “insulation contact” (IC) rated.
Kraft and standard foil facings will burn and cannot be left exposed. Install facings in substantial contact with the assembly finish material. Protect from open flame or other heat source
